Sherpa Fleece Blanket Care: Washing a 60x80 Throw
By Revolver Magazine Online Store | Heavy Metal Merch | Published: 2026-11-05
Category: نصائح والعناية
A practical wash-and-store routine for a 60x80 sherpa fleece blanket, with checkpoints that keep the mink fleece print and the sherpa pile looking sharp.
Quick answer
Machine wash your sherpa fleece blanket in cold water on a gentle cycle, then tumble dry on low or air-dry flat—high heat is what flattens the sherpa pile and dulls the printed mink fleece.
Why the two-layer build changes your washing choices
A sherpa fleece blanket is really two fabrics bonded together: a lofted sherpa face and a smoother mink fleece back that carries the print. Heat and agitation affect them differently—the sherpa side can mat and pill, while the mink side can lose print crispness. That is why cold water and low heat matter more here than on a single-layer throw.
The 60x80 blanket size (152cm x 203cm) is large enough to wrap around an adult but bulky in a home washer. If your drum is small, wash it alone rather than cramming it in with towels.
Skip fabric softener and dryer sheets
Softener coats synthetic fibers and reduces the loft that makes sherpa feel warm. Dryer sheets do the same and can leave a film on the printed mink side. If static is a problem, a low-heat dry and a quick shake usually settle it.
Step-by-step sherpa blanket care
- Shake out and check the label: Shake the blanket outdoors to release loose debris, then read the care label for any store-specific limits. Common mistake: skipping the shake and sending sand or crumbs into the wash, where they work into the pile. Checkpoint: no visible debris or loose items before washing.
- Wash cold on a gentle cycle: Use cold water and a gentle or delicate cycle with a mild detergent. Wash the blanket alone or with similar low-lint items. Common mistake: using hot water or a heavy-duty cycle, which increases pilling on the sherpa face. Checkpoint: water temperature set to cold and cycle set to gentle.
- Skip fabric softener and bleach: Add no fabric softener, dryer sheets or bleach. Common mistake: adding softener to make it feel cosier—it actually reduces the loft and warmth of the sherpa. Checkpoint: detergent only in the dispenser.
- Tumble dry low or air-dry flat: Tumble dry on low with dryer balls to help separate the pile, or air-dry flat over a drying rack. Common mistake: high heat, which can flatten the sherpa and dull the mink fleece print. Checkpoint: check the blanket every 15 minutes if tumble drying.
- Brush and fold for storage: Once fully dry, brush the sherpa side lightly with your fingers or a soft brush to lift the pile, then fold loosely and store in a dry, breathable place away from direct sunlight. Common mistake: storing a slightly damp blanket, which traps moisture and odor. Checkpoint: blanket is completely dry before folding.
Product facts
- GHOST - SHERPA FLEECE BLANKET - 60"x80": The GHOST Sherpa Fleece Blanket is 60in x 80in (152cm x 203cm) and made from 280g sherpa fleece bonded to 220g mink fleece. The bonded two-layer construction is the reason you should avoid high heat and harsh agitation, which can separate or flatten the layers.
GHOST - SHERPA FLEECE BLANKET - 60"x80" - GHOST - SHERPA FLEECE BLANKET - 60"x80": It is polyester and machine washable, with high-definition graphics on the mink fleece side. Polyester dries quickly on low heat, and turning the blanket print-side in protects those graphics during the wash.
